bcherb2
b487b0e855
Fresh history. This is the repo a throwaway VM clones anonymously: it brings a
machine to a working baseline and carries nothing that makes it mine.
56 files. 50 land in $HOME, 3 are chezmoi metadata, 2 are repo documentation,
1 is the manifest, and a 15-file test harness stays behind in .tests/.
What did not travel, and why:
encrypted_private_bws-token.age a real credential; age is dropped entirely
.chezmoidata/bws.toml env-var -> secret-id map; belongs with the
tier that can use it
SECRETS.md documentation of the rules, not config
finish-setup.sh.tmpl superseded by dotup
nvim/init.lua.backup dead file
dot_claude/**, dot_codex/**, 120 files of agent config, private tier
dot_pi/**
De-identified rather than dropped:
.gitconfig [user], the GitHub ssh rewrite and both Gitea host rewrites are
identity, not configuration. They move behind an [include] of
~/.config/git/config.local, which the private tier writes. Git
treats a missing include as a no-op, so a public-only machine
reads the file and stops.
.zshrc the two gitea aliases carried a personal domain and a LAN IP.
They move behind a guarded source of ~/.config/zsh/local.zsh,
the sibling of the secrets.zsh seam phase 2 established.
nvim a commented-out LM Studio endpoint naming a LAN address.
ghostty a stale auto-generated header naming an absolute home directory.
Newly captured, never tracked before: ~/.zshenv, ~/.config/gh/config.yml. The
former sourced ~/.cargo/env unguarded, so every zsh on a machine without rustup
printed an error -- the same shape as the unguarded oh-my-zsh source phase 2
fixed. It is guarded now.
.chezmoiexternal.toml grows from one entry to six. oh-my-zsh, powerlevel10k,
zsh-autosuggestions, zsh-ai and tpm were hand-installed and declared nowhere,
which is why `chezmoi init --apply` on a clean box produced a .zshrc that broke
the shell it configures. The theme and both plugins nest under
.oh-my-zsh/custom/, which is what $ZSH_CUSTOM resolves to.
dotup gains an install engine. It resolves each selected package to a channel
(apt, brew, npm, uv, snap, deb, flatpak, tarball, script, builtin) through one
function every consumer reads, probes apt-cache before batching so a name apt
does not know moves to brew instead of failing all thirty, and retries
individually if a batch still fails -- which earned its keep on the first real
container run, where mermaid-cli's puppeteer dependency failed and the other
twelve npm packages installed anyway. --unattended computes safe defaults fresh
from the manifest rather than inheriting a state file, and refuses private and
invasive rows outright even when a stale state file ticks them.
The manifest gains @spec, a second directive kind alongside @needs, carrying the
argument a channel needs but a package name cannot supply -- the scoped npm
name, the flatpak app id, the .deb source. The TSV stays five columns wide.
Three bugs the container runs found, all fixed here:
* `apt install nodejs` gives you node WITHOUT npm on Ubuntu, so all thirteen
npm packages failed on a fresh box. The manifest asks apt for both names.
* A tool installed a moment ago is not on this process's PATH -- uv lands in
~/.local/bin, npm -g honours the ~/.npmrc prefix, linuxbrew is outside a
non-login PATH. Resolved by looking in the places we just wrote to, never by
exporting a modified PATH.
* `A || { B && C; }` is one || list, so when `command -v sudo` failed the list
failed and `set -e` killed dotup at load. On a non-root machine with no
sudo it died before printing anything. There is a regression test.
.zshenv and .p10k.zsh are marked private_. Both are shell code the login shell
executes and both applied at 664, group-writable. Third occurrence of the class
of bug phase 1 found on .pi/agent/auth.json and phase 2 found on .zshrc; the
first one found on purpose rather than by accident.
Verification: 81 assertions, 81/81 on this box and in ubuntu:24.04, ubuntu:22.04
and debian:12. The installer is driven against a directory of fake package
managers that record what they were asked to do and install nothing, so the
engine is exercised end to end without a package landing on the test machine.
`gitleaks detect` over the full history and the working tree: no leaks found,
with no allowlist and no .gitleaks.toml.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
506 lines
19 KiB
Cheetah
506 lines
19 KiB
Cheetah
{{- if eq .chezmoi.os "darwin" -}}
|
|
#? Config file for btop v. 1.4.5
|
|
|
|
#* Name of a btop++/bpytop/bashtop formatted ".theme" file, "Default" and "TTY" for builtin themes.
|
|
#* Themes should be placed in "../share/btop/themes" relative to binary or "$HOME/.config/btop/themes"
|
|
color_theme = "TTY"
|
|
|
|
#* If the theme set background should be shown, set to False if you want terminal background transparency.
|
|
theme_background = True
|
|
|
|
#* Sets if 24-bit truecolor should be used, will convert 24-bit colors to 256 color (6x6x6 color cube) if false.
|
|
truecolor = True
|
|
|
|
#* Set to true to force tty mode regardless if a real tty has been detected or not.
|
|
#* Will force 16-color mode and TTY theme, set all graph symbols to "tty" and swap out other non tty friendly symbols.
|
|
force_tty = False
|
|
|
|
#* Define presets for the layout of the boxes. Preset 0 is always all boxes shown with default settings. Max 9 presets.
|
|
#* Format: "box_name:P:G,box_name:P:G" P=(0 or 1) for alternate positions, G=graph symbol to use for box.
|
|
#* Use whitespace " " as separator between different presets.
|
|
#* Example: "cpu:0:default,mem:0:tty,proc:1:default cpu:0:braille,proc:0:tty"
|
|
presets = "cpu:1:default,proc:0:default cpu:0:default,mem:0:default,net:0:default cpu:0:block,net:0:tty"
|
|
|
|
#* Set to True to enable "h,j,k,l,g,G" keys for directional control in lists.
|
|
#* Conflicting keys for h:"help" and k:"kill" is accessible while holding shift.
|
|
vim_keys = False
|
|
|
|
#* Rounded corners on boxes, is ignored if TTY mode is ON.
|
|
rounded_corners = True
|
|
|
|
#* Default symbols to use for graph creation, "braille", "block" or "tty".
|
|
#* "braille" offers the highest resolution but might not be included in all fonts.
|
|
#* "block" has half the resolution of braille but uses more common characters.
|
|
#* "tty" uses only 3 different symbols but will work with most fonts and should work in a real TTY.
|
|
#* Note that "tty" only has half the horizontal resolution of the other two, so will show a shorter historical view.
|
|
graph_symbol = "braille"
|
|
|
|
# Graph symbol to use for graphs in cpu box, "default", "braille", "block" or "tty".
|
|
graph_symbol_cpu = "default"
|
|
|
|
# Graph symbol to use for graphs in gpu box, "default", "braille", "block" or "tty".
|
|
graph_symbol_gpu = "default"
|
|
|
|
# Graph symbol to use for graphs in cpu box, "default", "braille", "block" or "tty".
|
|
graph_symbol_mem = "default"
|
|
|
|
# Graph symbol to use for graphs in cpu box, "default", "braille", "block" or "tty".
|
|
graph_symbol_net = "default"
|
|
|
|
# Graph symbol to use for graphs in cpu box, "default", "braille", "block" or "tty".
|
|
graph_symbol_proc = "default"
|
|
|
|
#* Manually set which boxes to show. Available values are "cpu mem net proc" and "gpu0" through "gpu5", separate values with whitespace.
|
|
shown_boxes = "cpu mem net proc"
|
|
|
|
#* Update time in milliseconds, recommended 2000 ms or above for better sample times for graphs.
|
|
update_ms = 2000
|
|
|
|
#* Processes sorting, "pid" "program" "arguments" "threads" "user" "memory" "cpu lazy" "cpu direct",
|
|
#* "cpu lazy" sorts top process over time (easier to follow), "cpu direct" updates top process directly.
|
|
proc_sorting = "cpu lazy"
|
|
|
|
#* Reverse sorting order, True or False.
|
|
proc_reversed = False
|
|
|
|
#* Show processes as a tree.
|
|
proc_tree = False
|
|
|
|
#* Use the cpu graph colors in the process list.
|
|
proc_colors = True
|
|
|
|
#* Use a darkening gradient in the process list.
|
|
proc_gradient = True
|
|
|
|
#* If process cpu usage should be of the core it's running on or usage of the total available cpu power.
|
|
proc_per_core = True
|
|
|
|
#* Show process memory as bytes instead of percent.
|
|
proc_mem_bytes = True
|
|
|
|
#* Show cpu graph for each process.
|
|
proc_cpu_graphs = True
|
|
|
|
#* Use /proc/[pid]/smaps for memory information in the process info box (very slow but more accurate)
|
|
proc_info_smaps = False
|
|
|
|
#* Show proc box on left side of screen instead of right.
|
|
proc_left = False
|
|
|
|
#* (Linux) Filter processes tied to the Linux kernel(similar behavior to htop).
|
|
proc_filter_kernel = False
|
|
|
|
#* In tree-view, always accumulate child process resources in the parent process.
|
|
proc_aggregate = False
|
|
|
|
#* Sets the CPU stat shown in upper half of the CPU graph, "total" is always available.
|
|
#* Select from a list of detected attributes from the options menu.
|
|
cpu_graph_upper = "Auto"
|
|
|
|
#* Sets the CPU stat shown in lower half of the CPU graph, "total" is always available.
|
|
#* Select from a list of detected attributes from the options menu.
|
|
cpu_graph_lower = "iowait"
|
|
|
|
#* If gpu info should be shown in the cpu box. Available values = "Auto", "On" and "Off".
|
|
show_gpu_info = "Auto"
|
|
|
|
#* Toggles if the lower CPU graph should be inverted.
|
|
cpu_invert_lower = True
|
|
|
|
#* Set to True to completely disable the lower CPU graph.
|
|
cpu_single_graph = False
|
|
|
|
#* Show cpu box at bottom of screen instead of top.
|
|
cpu_bottom = False
|
|
|
|
#* Shows the system uptime in the CPU box.
|
|
show_uptime = True
|
|
|
|
#* Shows the CPU package current power consumption in watts. Requires running `make setcap` or `make setuid` or running with sudo.
|
|
show_cpu_watts = True
|
|
|
|
#* Show cpu temperature.
|
|
check_temp = True
|
|
|
|
#* Which sensor to use for cpu temperature, use options menu to select from list of available sensors.
|
|
cpu_sensor = "Auto"
|
|
|
|
#* Show temperatures for cpu cores also if check_temp is True and sensors has been found.
|
|
show_coretemp = True
|
|
|
|
#* Set a custom mapping between core and coretemp, can be needed on certain cpus to get correct temperature for correct core.
|
|
#* Use lm-sensors or similar to see which cores are reporting temperatures on your machine.
|
|
#* Format "x:y" x=core with wrong temp, y=core with correct temp, use space as separator between multiple entries.
|
|
#* Example: "4:0 5:1 6:3"
|
|
cpu_core_map = ""
|
|
|
|
#* Which temperature scale to use, available values: "celsius", "fahrenheit", "kelvin" and "rankine".
|
|
temp_scale = "celsius"
|
|
|
|
#* Use base 10 for bits/bytes sizes, KB = 1000 instead of KiB = 1024.
|
|
base_10_sizes = False
|
|
|
|
#* Show CPU frequency.
|
|
show_cpu_freq = True
|
|
|
|
#* Draw a clock at top of screen, formatting according to strftime, empty string to disable.
|
|
#* Special formatting: /host = hostname | /user = username | /uptime = system uptime
|
|
clock_format = "%X"
|
|
|
|
#* Update main ui in background when menus are showing, set this to false if the menus is flickering too much for comfort.
|
|
background_update = True
|
|
|
|
#* Custom cpu model name, empty string to disable.
|
|
custom_cpu_name = ""
|
|
|
|
#* Optional filter for shown disks, should be full path of a mountpoint, separate multiple values with whitespace " ".
|
|
#* Only disks matching the filter will be shown. Prepend exclude= to only show disks not matching the filter. Examples: disk_filter="/boot /home/user", disks_filter="exclude=/boot /home/user"
|
|
disks_filter = ""
|
|
|
|
#* Show graphs instead of meters for memory values.
|
|
mem_graphs = True
|
|
|
|
#* Show mem box below net box instead of above.
|
|
mem_below_net = False
|
|
|
|
#* Count ZFS ARC in cached and available memory.
|
|
zfs_arc_cached = True
|
|
|
|
#* If swap memory should be shown in memory box.
|
|
show_swap = True
|
|
|
|
#* Show swap as a disk, ignores show_swap value above, inserts itself after first disk.
|
|
swap_disk = True
|
|
|
|
#* If mem box should be split to also show disks info.
|
|
show_disks = True
|
|
|
|
#* Filter out non physical disks. Set this to False to include network disks, RAM disks and similar.
|
|
only_physical = False
|
|
|
|
#* Read disks list from /etc/fstab. This also disables only_physical.
|
|
use_fstab = True
|
|
|
|
#* Setting this to True will hide all datasets, and only show ZFS pools. (IO stats will be calculated per-pool)
|
|
zfs_hide_datasets = False
|
|
|
|
#* Set to true to show available disk space for privileged users.
|
|
disk_free_priv = True
|
|
|
|
#* Toggles if io activity % (disk busy time) should be shown in regular disk usage view.
|
|
show_io_stat = True
|
|
|
|
#* Toggles io mode for disks, showing big graphs for disk read/write speeds.
|
|
io_mode = False
|
|
|
|
#* Set to True to show combined read/write io graphs in io mode.
|
|
io_graph_combined = False
|
|
|
|
#* Set the top speed for the io graphs in MiB/s (100 by default), use format "mountpoint:speed" separate disks with whitespace " ".
|
|
#* Example: "/mnt/media:100 /:20 /boot:1".
|
|
io_graph_speeds = ""
|
|
|
|
#* Set fixed values for network graphs in Mebibits. Is only used if net_auto is also set to False.
|
|
net_download = 100
|
|
|
|
net_upload = 100
|
|
|
|
#* Use network graphs auto rescaling mode, ignores any values set above and rescales down to 10 Kibibytes at the lowest.
|
|
net_auto = True
|
|
|
|
#* Sync the auto scaling for download and upload to whichever currently has the highest scale.
|
|
net_sync = True
|
|
|
|
#* Starts with the Network Interface specified here.
|
|
net_iface = ""
|
|
|
|
#* "True" shows bitrates in base 10 (Kbps, Mbps). "False" shows bitrates in binary sizes (Kibps, Mibps, etc.). "Auto" uses base_10_sizes.
|
|
base_10_bitrate = "Auto"
|
|
|
|
#* Show battery stats in top right if battery is present.
|
|
show_battery = True
|
|
|
|
#* Which battery to use if multiple are present. "Auto" for auto detection.
|
|
selected_battery = "Auto"
|
|
|
|
#* Show power stats of battery next to charge indicator.
|
|
show_battery_watts = True
|
|
|
|
#* Set loglevel for "~/.config/btop/btop.log" levels are: "ERROR" "WARNING" "INFO" "DEBUG".
|
|
#* The level set includes all lower levels, i.e. "DEBUG" will show all logging info.
|
|
log_level = "WARNING"
|
|
|
|
#* Measure PCIe throughput on NVIDIA cards, may impact performance on certain cards.
|
|
nvml_measure_pcie_speeds = True
|
|
|
|
#* Measure PCIe throughput on AMD cards, may impact performance on certain cards.
|
|
rsmi_measure_pcie_speeds = True
|
|
|
|
#* Horizontally mirror the GPU graph.
|
|
gpu_mirror_graph = True
|
|
|
|
#* Custom gpu0 model name, empty string to disable.
|
|
custom_gpu_name0 = ""
|
|
|
|
#* Custom gpu1 model name, empty string to disable.
|
|
custom_gpu_name1 = ""
|
|
|
|
#* Custom gpu2 model name, empty string to disable.
|
|
custom_gpu_name2 = ""
|
|
|
|
#* Custom gpu3 model name, empty string to disable.
|
|
custom_gpu_name3 = ""
|
|
|
|
#* Custom gpu4 model name, empty string to disable.
|
|
custom_gpu_name4 = ""
|
|
|
|
#* Custom gpu5 model name, empty string to disable.
|
|
custom_gpu_name5 = ""
|
|
{{- else if eq .chezmoi.os "linux" -}}
|
|
#? Config file for btop v. 1.3.0
|
|
|
|
#* Name of a btop++/bpytop/bashtop formatted ".theme" file, "Default" and "TTY" for builtin themes.
|
|
#* Themes should be placed in "../share/btop/themes" relative to binary or "$HOME/.config/btop/themes"
|
|
color_theme = "TTY"
|
|
|
|
#* If the theme set background should be shown, set to False if you want terminal background transparency.
|
|
theme_background = True
|
|
|
|
#* Sets if 24-bit truecolor should be used, will convert 24-bit colors to 256 color (6x6x6 color cube) if false.
|
|
truecolor = True
|
|
|
|
#* Set to true to force tty mode regardless if a real tty has been detected or not.
|
|
#* Will force 16-color mode and TTY theme, set all graph symbols to "tty" and swap out other non tty friendly symbols.
|
|
force_tty = False
|
|
|
|
#* Define presets for the layout of the boxes. Preset 0 is always all boxes shown with default settings. Max 9 presets.
|
|
#* Format: "box_name:P:G,box_name:P:G" P=(0 or 1) for alternate positions, G=graph symbol to use for box.
|
|
#* Use whitespace " " as separator between different presets.
|
|
#* Example: "cpu:0:default,mem:0:tty,proc:1:default cpu:0:braille,proc:0:tty"
|
|
presets = "cpu:1:default,proc:0:default cpu:0:default,mem:0:default,net:0:default cpu:0:block,net:0:tty"
|
|
|
|
#* Set to True to enable "h,j,k,l,g,G" keys for directional control in lists.
|
|
#* Conflicting keys for h:"help" and k:"kill" is accessible while holding shift.
|
|
vim_keys = False
|
|
|
|
#* Rounded corners on boxes, is ignored if TTY mode is ON.
|
|
rounded_corners = True
|
|
|
|
#* Default symbols to use for graph creation, "braille", "block" or "tty".
|
|
#* "braille" offers the highest resolution but might not be included in all fonts.
|
|
#* "block" has half the resolution of braille but uses more common characters.
|
|
#* "tty" uses only 3 different symbols but will work with most fonts and should work in a real TTY.
|
|
#* Note that "tty" only has half the horizontal resolution of the other two, so will show a shorter historical view.
|
|
graph_symbol = "braille"
|
|
|
|
# Graph symbol to use for graphs in cpu box, "default", "braille", "block" or "tty".
|
|
graph_symbol_cpu = "default"
|
|
|
|
# Graph symbol to use for graphs in gpu box, "default", "braille", "block" or "tty".
|
|
graph_symbol_gpu = "default"
|
|
|
|
# Graph symbol to use for graphs in cpu box, "default", "braille", "block" or "tty".
|
|
graph_symbol_mem = "default"
|
|
|
|
# Graph symbol to use for graphs in cpu box, "default", "braille", "block" or "tty".
|
|
graph_symbol_net = "default"
|
|
|
|
# Graph symbol to use for graphs in cpu box, "default", "braille", "block" or "tty".
|
|
graph_symbol_proc = "default"
|
|
|
|
#* Manually set which boxes to show. Available values are "cpu mem net proc" and "gpu0" through "gpu5", separate values with whitespace.
|
|
shown_boxes = "cpu mem net proc"
|
|
|
|
#* Update time in milliseconds, recommended 2000 ms or above for better sample times for graphs.
|
|
update_ms = 2000
|
|
|
|
#* Processes sorting, "pid" "program" "arguments" "threads" "user" "memory" "cpu lazy" "cpu direct",
|
|
#* "cpu lazy" sorts top process over time (easier to follow), "cpu direct" updates top process directly.
|
|
proc_sorting = "cpu direct"
|
|
|
|
#* Reverse sorting order, True or False.
|
|
proc_reversed = False
|
|
|
|
#* Show processes as a tree.
|
|
proc_tree = False
|
|
|
|
#* Use the cpu graph colors in the process list.
|
|
proc_colors = True
|
|
|
|
#* Use a darkening gradient in the process list.
|
|
proc_gradient = True
|
|
|
|
#* If process cpu usage should be of the core it's running on or usage of the total available cpu power.
|
|
proc_per_core = True
|
|
|
|
#* Show process memory as bytes instead of percent.
|
|
proc_mem_bytes = True
|
|
|
|
#* Show cpu graph for each process.
|
|
proc_cpu_graphs = True
|
|
|
|
#* Use /proc/[pid]/smaps for memory information in the process info box (very slow but more accurate)
|
|
proc_info_smaps = False
|
|
|
|
#* Show proc box on left side of screen instead of right.
|
|
proc_left = False
|
|
|
|
#* (Linux) Filter processes tied to the Linux kernel(similar behavior to htop).
|
|
proc_filter_kernel = False
|
|
|
|
#* In tree-view, always accumulate child process resources in the parent process.
|
|
proc_aggregate = False
|
|
|
|
#* Sets the CPU stat shown in upper half of the CPU graph, "total" is always available.
|
|
#* Select from a list of detected attributes from the options menu.
|
|
cpu_graph_upper = "Auto"
|
|
|
|
#* Sets the CPU stat shown in lower half of the CPU graph, "total" is always available.
|
|
#* Select from a list of detected attributes from the options menu.
|
|
cpu_graph_lower = "iowait"
|
|
|
|
#* If gpu info should be shown in the cpu box. Available values = "Auto", "On" and "Off".
|
|
show_gpu_info = "Auto"
|
|
|
|
#* Toggles if the lower CPU graph should be inverted.
|
|
cpu_invert_lower = True
|
|
|
|
#* Set to True to completely disable the lower CPU graph.
|
|
cpu_single_graph = False
|
|
|
|
#* Show cpu box at bottom of screen instead of top.
|
|
cpu_bottom = False
|
|
|
|
#* Shows the system uptime in the CPU box.
|
|
show_uptime = True
|
|
|
|
#* Show cpu temperature.
|
|
check_temp = True
|
|
|
|
#* Which sensor to use for cpu temperature, use options menu to select from list of available sensors.
|
|
cpu_sensor = "Auto"
|
|
|
|
#* Show temperatures for cpu cores also if check_temp is True and sensors has been found.
|
|
show_coretemp = True
|
|
|
|
#* Set a custom mapping between core and coretemp, can be needed on certain cpus to get correct temperature for correct core.
|
|
#* Use lm-sensors or similar to see which cores are reporting temperatures on your machine.
|
|
#* Format "x:y" x=core with wrong temp, y=core with correct temp, use space as separator between multiple entries.
|
|
#* Example: "4:0 5:1 6:3"
|
|
cpu_core_map = ""
|
|
|
|
#* Which temperature scale to use, available values: "celsius", "fahrenheit", "kelvin" and "rankine".
|
|
temp_scale = "celsius"
|
|
|
|
#* Use base 10 for bits/bytes sizes, KB = 1000 instead of KiB = 1024.
|
|
base_10_sizes = False
|
|
|
|
#* Show CPU frequency.
|
|
show_cpu_freq = True
|
|
|
|
#* Draw a clock at top of screen, formatting according to strftime, empty string to disable.
|
|
#* Special formatting: /host = hostname | /user = username | /uptime = system uptime
|
|
clock_format = "%X"
|
|
|
|
#* Update main ui in background when menus are showing, set this to false if the menus is flickering too much for comfort.
|
|
background_update = True
|
|
|
|
#* Custom cpu model name, empty string to disable.
|
|
custom_cpu_name = ""
|
|
|
|
#* Optional filter for shown disks, should be full path of a mountpoint, separate multiple values with whitespace " ".
|
|
#* Begin line with "exclude=" to change to exclude filter, otherwise defaults to "most include" filter. Example: disks_filter="exclude=/boot /home/user".
|
|
disks_filter = ""
|
|
|
|
#* Show graphs instead of meters for memory values.
|
|
mem_graphs = True
|
|
|
|
#* Show mem box below net box instead of above.
|
|
mem_below_net = False
|
|
|
|
#* Count ZFS ARC in cached and available memory.
|
|
zfs_arc_cached = True
|
|
|
|
#* If swap memory should be shown in memory box.
|
|
show_swap = True
|
|
|
|
#* Show swap as a disk, ignores show_swap value above, inserts itself after first disk.
|
|
swap_disk = True
|
|
|
|
#* If mem box should be split to also show disks info.
|
|
show_disks = True
|
|
|
|
#* Filter out non physical disks. Set this to False to include network disks, RAM disks and similar.
|
|
only_physical = False
|
|
|
|
#* Read disks list from /etc/fstab. This also disables only_physical.
|
|
use_fstab = True
|
|
|
|
#* Setting this to True will hide all datasets, and only show ZFS pools. (IO stats will be calculated per-pool)
|
|
zfs_hide_datasets = False
|
|
|
|
#* Set to true to show available disk space for privileged users.
|
|
disk_free_priv = True
|
|
|
|
#* Toggles if io activity % (disk busy time) should be shown in regular disk usage view.
|
|
show_io_stat = True
|
|
|
|
#* Toggles io mode for disks, showing big graphs for disk read/write speeds.
|
|
io_mode = False
|
|
|
|
#* Set to True to show combined read/write io graphs in io mode.
|
|
io_graph_combined = False
|
|
|
|
#* Set the top speed for the io graphs in MiB/s (100 by default), use format "mountpoint:speed" separate disks with whitespace " ".
|
|
#* Example: "/mnt/media:100 /:20 /boot:1".
|
|
io_graph_speeds = ""
|
|
|
|
#* Set fixed values for network graphs in Mebibits. Is only used if net_auto is also set to False.
|
|
net_download = 100
|
|
|
|
net_upload = 100
|
|
|
|
#* Use network graphs auto rescaling mode, ignores any values set above and rescales down to 10 Kibibytes at the lowest.
|
|
net_auto = False
|
|
|
|
#* Sync the auto scaling for download and upload to whichever currently has the highest scale.
|
|
net_sync = True
|
|
|
|
#* Starts with the Network Interface specified here.
|
|
net_iface = ""
|
|
|
|
#* Show battery stats in top right if battery is present.
|
|
show_battery = True
|
|
|
|
#* Which battery to use if multiple are present. "Auto" for auto detection.
|
|
selected_battery = "Auto"
|
|
|
|
#* Set loglevel for "~/.config/btop/btop.log" levels are: "ERROR" "WARNING" "INFO" "DEBUG".
|
|
#* The level set includes all lower levels, i.e. "DEBUG" will show all logging info.
|
|
log_level = "WARNING"
|
|
|
|
#* Measure PCIe throughput on NVIDIA cards, may impact performance on certain cards.
|
|
nvml_measure_pcie_speeds = True
|
|
|
|
#* Horizontally mirror the GPU graph.
|
|
gpu_mirror_graph = True
|
|
|
|
#* Custom gpu0 model name, empty string to disable.
|
|
custom_gpu_name0 = ""
|
|
|
|
#* Custom gpu1 model name, empty string to disable.
|
|
custom_gpu_name1 = ""
|
|
|
|
#* Custom gpu2 model name, empty string to disable.
|
|
custom_gpu_name2 = ""
|
|
|
|
#* Custom gpu3 model name, empty string to disable.
|
|
custom_gpu_name3 = ""
|
|
|
|
#* Custom gpu4 model name, empty string to disable.
|
|
custom_gpu_name4 = ""
|
|
|
|
#* Custom gpu5 model name, empty string to disable.
|
|
custom_gpu_name5 = ""
|
|
{{- end }}
|